Gold Member Since 2016
Audited Supplier
Zhejiang Zhenbo Precision Machinery Co., Ltd.

Welding Machine, Ultrasonic Welder, Ammeter Sheel Welder manufacturer / supplier in China, offering 1500W Ce Approved Ultrasonic Welder for Ammeter Shell (ZB-102015), High Quality Linear Vibration Welder/ Welding Machine, Students Table Vibration Welding Machine From China (ZB-3056) and so on.

(/ )

Supplier Homepage Product Ultrasonic welder Others Ultrasonic welder 1500W Ce Approved Ultrasonic Welder for Ammeter Shell (ZB-102015)

1500W Ce Approved Ultrasonic Welder for Ammeter Shell (ZB-102015)

FOB Price: US $8,000-15,000 / Piece
Min. Order: 1 Piece
Min. Order FOB Price
1 Piece US $8,000-15,000/ Piece
Get Latest Price
Port: Wenzhou, China
Production Capacity: 20sets/ Month
Payment Terms: L/C, T/T

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: ZB-102015
  • Current: Alternating Current
  • Application: Container
  • Welding Time: 0-99s
  • Frequency: 1500W
  • Transport Package: Wooden Case
  • Origin: China
  • Type: Spot Welders
  • Model: WSM
  • Welding Material: Thermoplastic
  • Voltage: 380V
  • Trademark: NEW STAR
  • Specification: L580mm*W420mm*H1200mm
  • HS Code: 8515809090
Product Description
The ultrasonic generator converts high-frequency energy will be transferred to mechanical motion of same frequency through ultrasonic transducer, and then the mechanical motion can be transferred to the welding horn by amplitude modulator, which can adjust the amplitude. The welding horn will pass the absorbed heat to the junction of workpieces for welding. In this particular zone, vibration energy can be converted into heat through friction. Ultrasonic can not only be used to weld hard thermoplastic but also to process the textile and thin-film
Ultrasonic welding technique
A. Welding  
The typical profile of a joint design for ultrasonic welding has two functions<o:p>
1) Its shape of a groove and tongue eases positicning during assembly and maintains .In place the parts during the welding cycle.<o:p>
2)The energy director in the joint concentrates the energy to a small ared suppiles at the same time the necessary material for an optional welding joint. Th eprofile of the joint area depends largely on the purpose of the application; it can therefore be shape quite differently. The settings of the machine, like welding pressure and amplitude, are adjustd to produce a movement of the horn front in phase with the part to be welded. The second part  placed in the fixture must stay passive. The motional interference produces friction in the contact area of the two parts. Due to this highly intensive ultrasonic vibration the joint area melts together immediately. Under the pressure applied simultaneously and some friction of a second longer than the ultrasonic impulse lasts the melted area solidifies and inseparable joint is produced.<o:p>
B. Riveting 
Ultrasonic riveting is used to assemble injected plastic parts of another material .Studs on the molded plastic part penetrate the second article to be mounted. The projecting part of these studs is formed into riveting heads with a specially shaped horn tip. The cavity in the horn is big enough to hold the displaced material and form it nicely. The amplitude of the horn has to be adjusted formaximum motional interence between the plastic part and the horn tip and plastic stud. Heat is then produced by friction between the plastic part and the horn tip, which allows an immediate melting in this area. The pressure controlled by the welding machine lets the riveting head solidify after a short hold time. Multi-tip horns are often used for simultaneous of different areas on the same part. 

1500W Ce Approved Ultrasonic Welder for Ammeter Shell (ZB-102015)1500W Ce Approved Ultrasonic Welder for Ammeter Shell (ZB-102015)
Send your message to this supplier
Mr. Cheng
To: Mr. Cheng

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now